A thin-film solar cell is a second generation solar cell that is made by depositing one or more thin layers, or thin film (TF) of photovoltaic material on a substrate, such as glass, plastic or metal. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon (a-Si, TF-Si). What i...

The solar application in Africa can really makes sense and is achievable for the following reasons: 1: Abundant sunlight. Botswana and Namibia offer the potential to capture around 10 hours of strong sunlight per day for 300 days per year and have some of the highest solar irradiance potential of any country in Africa, which translates to highly productive concentrated solar power (CSP) and photov...

Aluminum roof clamps is one of the solar system components to fit most of standing seam profiles and then combine with rails, mid clamp, end clamp and other components to work as solar racking solution. Made of 6005-T6 aluminum with all stainless steel hardware. Antaisolar offer a variety of roof attachment system guarantees superior strength for parallel and perpendicular loading. According to di...

The household photovoltaic power station has become the top choice of power supply for many families and its installation number is greatly increasing year by year. The service life of a PV power station system is about 25 years. How to ensure its smooth operation in such long period? This is closely related to your scientific operation and maintenance. Routine Maintenance 1.Users should regularly...

GeneralIntroduction: Antaisolar standing seam roof mounting system is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationPr...

With the rapid development of distributed photovoltaic in China, the roof has become one of the most important carriers to install photovoltaic power station. Among them, the metal sheet roof is a common pitched type with a slope of 10% or 5%, which is made of corrugated steel sheet or trapezoidal metal sheet, etc. Precautions in the design of metal roof mounting system 1.Define the form and layin...

General Introduction: The railless metal roof mounting system facilitates the rapid mounting of framed PV modules on metal sheet roofs with minimum thickness 0.8mm, only four components are required to install the modules directly to the roof. A base mounting clip is 100mm or 140mm long, which is easy to carry and attach to almost all trapezoidal and sandwich roofs. The EPDM sheet is in the packag...

 Install Standing Seam Roof Mounting System General Introduction: The railless roof clamps accelerate the quick mounting of framed PV modules on standing seam tin roof. The whole system only consists of four components, which is easy to install and attach to almost all trapezoidal and sandwich roofs. The EPDM sheet is in the package to seal the screw against the metal sheet. Installation Proc...