Install Standing Seam Roof Mounting System

General Introduction:

The railless roof clamps accelerate the quick mounting of framed PV modules on standing seam tin roof. The whole system only consists of four components, which is easy to install and attach to almost all trapezoidal and sandwich roofs. The EPDM sheet is in the package to seal the screw against the metal sheet.

Installation Process:

a.Fixing the TYN-104 roof clamp according to layout

b. Placing the solar panels and use the end clamps to fix the panels

c. Using the mid clamps to fix the panels

d. Placing the entire panel from bottom to top

For more installation details, please view the following video:

Installation precautions:

***Measuring the width of the standing seam to ensure that the roof clamps can match with it

***The four self-tapping screws of the TYN-104roof clamp are pre-assembled, and can be easily fastened after adjusting the clamp position.

***The EPDM pad is sealed at the bottom of the TYN-104 roof clamp before shipment,  offering water-proof protection after installation.

***It needs to check the connection of the TYN-104 roof clamps and other connectors regularly especially when strong wind will come.

Based on seam type, you need to find compatible standing seam roof clamps that can be fixed with high reliability. Besides the TYN-104 roof clamp, Antaisolar offer various types of roof clamps feature a non-penetrating function for any needs. All the roof clamps are built from premium grade aluminum AL6005-T6 and stainless material that have outstanding holding power, durability and longevity. With the evolving application of solar energy, a large amount of rooftop space is turning into a power generation hub, Antaisolar roof clamps have supported numerous solar projects worldwide.

To learn more about Antaisolar roof solar mounting systems, please check out our Project References at https://www.antaisolar.com/roof-mounting_nc3