Adopt Multi-actuator drive mode with fast installation and operation. The cost-effective system is stable and efficient and is suitable for large-scale solar plant with multiple field condition adaptation.
• PV string power supply with back up battery
• Wireless communication, less cable consumption
• All-weather shadow avoid strategy
- Multi-Actuator drive with damper in between, significantly reduce resonance
- Linear actuator system, enables up to ±50° tracking
- With high natural frequency, stay stable for high critical wind speed
-Actuator is easy to install that only require one person
- U-shape torque tube higher section bending modulus
- Section purlin design can simplify the installation and strength the structure
Location: Thailand
Location: Thailand
On site video below
|
Electrical Specification |
System Specification |
||
|
Control Mode |
MCU |
Drive mode |
Electrical Linear-Actuator |
|
Tracking Accuracy |
2° |
Foundation Type |
Concrete/Pile Ramming Steel |
|
Protection Level |
IP65 |
Tracking range |
±50° |
|
Working Temperature |
-40℃~85℃ |
Module Layout |
One-in-Portrait (1P) |
|
Power Supply |
PV String Power Supply |
Ground Clearance |
0.5m |
|
Monitoring System |
SCADA (Optional) |
Working Wind Tolerance |
≤18m/s |
|
Communication |
Wireless/Wire Communication |
Max Wind Tolerance |
55m/s(ASCE7-05)
|
Related Tags :
Biopost ground mounting system
The Biopost ground mounting system is ideal for is applied for large solar ground project installation on a non-sandy ground.
Railless metal sheet mounting system
The Railless metal sheet mounting system is light, small , cost-effective and easy to mount on trapezoidal metal sheet, allows for easy logistics.
「TAI」Alloy Module Frame
「TAI」 alloy module frame can fix and seal the solar module, enhance the strength of the component, extend the service life, and make the component easier to transport and install.
Adjustable tilt flat roof mounting system
The Adjustable tilt flat roof mounting system can be set at a tilt angle from 10° to 60°，which has great flexibility and can help to get the maximum solar power output.
Standing seam roof mounting system
The Standing seam roof mounting system is a headache-free, no roof penetration mounting solution for metal roofs with standing seam design.
Angle-adjustable solar mounting system
The Angle-adjustable solar mounting system is designed to be adjusted to different angles for achieve better power generation according to different seasons.
Floating PV mounting system
It refers to the layout of floating power plants on water such as ponds, small lakes, reservoirs, and water storage tanks. Different from the fishing and light complementary type, it doesn’t require a large number of piling and fixing, and will not affect the water environment.
Balcony solar mounting system
Balcony solar mounting system provides three-in-one solution for solar panels installed on three different scenarios including balcony, wall and ground.
English
