The desert photovoltaic power plant in Inner Mongolia Autonomous Region, China, which used Antaisolar manu-adjustable solar fixed solar racking and had an installed capacity of 100MW, has been successfully connected to the local grid. It effectively encourages the organized production of local renewable energy, the ecological climate, plateau agriculture, and animal husbandry. The region has a relatively dry environment, extreme land desertification, and dust storms are normal. The landscape of the region, which is located on a hill, is high and undulating. Antaisolar resolved the immense difficulties presented by the challenging construction environments, delivering technology and product resources for this PV project with considerable expertise in working with difficult solar racking projects. By changing the tilt angle, the power station will receive more direct sunlight, improving power generation efficiency significantly. The power station’s annual power consumption is expected to be 195 million kwh, saving 64,200 tons of conventional coal and minimizing 204,000 tons of carbon dioxide and other gases. There is no question that the growth of the photovoltaic industry in the desert and Gobi not only has significant economic benefits, but it also serves an ecological role of sand prevention and control. It is expected to be the third recent method of sand protection and management, following afforestation and desertification regulation and sediment fixation by sand barriers. Based on the vision of "Backbone for Solar World", Antaisolar will focus on its brand positioning- the Expert in Hard & Core Technology for Solar Mounting & Tracking System, and strive to provide high-end customized solar racking solutions for global clients to safeguard the blue sky and white clouds.

Recently, Antaisolar announced that the 1st phase of one 10MW roof solar project is already completed at Cross-border Industrial Park in Jiangsu province, China, with Steel mounting system comprehensively adopted. With capacity of 2MW and railless ballast solar mounting solution, it was turned out to be a stable and easy solar installation on open flat roof space. The railless solar racking designed allowed the whole installation much quicker, without the long and cumbersome rails. According to local site wind rating requirement, it was secured by a certain weight of concrete block to achieve well performance. What’s more, the main material of this solar racking adopted was MAC steel with unique advantages.  It’s a kind of eco-friendly steel without hot-dip galvanized while maintaining highly corrosion resistance, also the deformation and manufacturing accuracy of the material in processing are significantly improved. Meanwhile, the pretreatment on the surface ensures the attractive appearance of the material. Antaisolar Steel solar mounting system is developed to diversify our product portfolio applicable for large-scale ground solar farm and concrete flat roof solar farm. Project site at strong corrosive soil, coastal salt-affected areas, agriculture greenhouse and composting site are all suitable for utilizing this new material.

Recently, Antaisolar secured an order for 32MW solar tracking project. This PV project went live in October, 2020 and expected to be completed in Ningxia Hui Autonomous Region of China at the end of 2020. It is the first PV project with multi-actuator solar tracking system in China, which will greatly boost the development of local PV industry and green economy. According to the severe environmental conditions of the site, such as severe soil sandification, extremely uneven terrain, high temperature, sandstorm, large temperature difference between day and night, and its topographic condition with 20% slope, Antaisolar technical team provided the best bifacial solar solution — Helios D1 solar tracking system, as well as a full range of professional technical support. Since its release in August 2020, Antaisolar Helios D1 has been attracting attention from the industry. Integrating a number of product patents and technical advantages, Helios D1 uses the multi-actuatordrive, which has the same stability as the solar fixed structure. No shaking accurs under the strong wind condition, and the system has a high natural frequency without resonance risk, which is suitable for areas with heavy sandstorm. The patented torque tube fastener effectively halves the installation time. Utilizing string inverters to obtain electricity, which can save costs of cables and trenching, also increase construction speed. MESH networking technology assists system with debugging and intelligent O&M. The successful cooperation has fully demonstrated that Antaisolar's products and services possess strong competitiveness and influence in the domestic market. Through creating desert ecological integration and combining PV with desert governance, this PV project has made contributions to the transformation and upgrading of the national energy structure. In the future, Antaisolar will continue to work with worldwide partners to optimize its global service, focusing on R&D innovation and product quality, constantly outputing stable, reliable and innovative solutions, and striving to become a trusted global solar mounting solution provider.

Recently, the 21.6MW solar project in Hiroshima, Japan, aluminum solar racking designed and provided by Antaisolar, is under installation after over 60 times of design modification. It was reviewed by METI of Japan in January, 2020 and commenced construction in March, expected to completed in March, 2021. While coping with complex terrain conditions --with more than 100cm snow high and complicated soil structure, and for maximizing solar panels arrangement with high cost performance and construction efficiency, Antaisolar finally provided the special customized solar racking solution after many times products debugging. The special-shaped aluminum racking has high strength that complies with the latest JIS standards. Highly pre-assembled before shipment can reduce on-site construction time and enable high cost performance and fast installation. With a triangular-roof-like arrangement, the panels are placed in both north and south directions to maximize the arrangement and improve power generation. Antaisolar has cumulatively installed around 4.55GW capacity in Japan since 2011. With excellent product quality, rigorous design, local branch and logistics center for efficient on-site support, it has always grown strongly and received high recognization in Japan. In the future, Antaisolar will continue to promote the localization process in Japan to offer convenient and reliable, innovative and efficient solar mounting solutions with excellent product quality and comprehensive services so as to create value for the clients.

With the solar energy development in South Korea, Antaisolar is striving to promote the utilization of solar racking that meet the local requirement and after years of in-depth market development with our key partner- Solar Chaser, the exclusive agent for almost four years.  We are honored to see Antaisolar’s aluminum solar racking is widely applied for numerous of ground solar power stations in Korea. Recently, in addition to the pile ground solar farms, Antaisolar offered the solar racking for one 400KW Agriculture solar project in Korea.  It is not only the first aluminum mounting structure for agricultural PV plant but also the biggest PV plant till now in Korean territory. It’s known that the combination of solar energy and agriculture helps to utilize the land efficiently in a smart way. The agricultural solar mounting system won’t hinder the growth of crops, meanwhile meeting the power generation demand. Besides, with enough elevation, it allows people and animals to pass through. According to the client response, the solar project is going smoothly and expected to completed within one week in May. Pre-assembled solar racking and solar screw foundation make the whole installation fast that really cost down on site labor costs.

LSS project, a firm pace on the road In December, a 50MW PV Poverty Alleviation Project in Qinghai, China, which is provided by Antaisolar with ground solar mounting solutions, has been successfully connected to the grid. This project is the largest Solar Pv Ground Mounting project supported by Antaisolar to date, and is also the largest PV poverty alleviation project undertaken by Antaisolar. It is significant to help Qinghai to get rid of poverty and gain continuous increase income. Antaisolar engineers combined with local multi-angle complex terrain to provide a ground solar mount solution with north-south direction and east-west direction adjustable. Besides, the local wind speed is 0.33KN/m2, the snow pressure is 0.30KN/m2, and the design racking span is 4.2m. It is known that there are abundant sunshine resources in Qinghai. The number of days of sunshine in the province is more than 6 hours, 250 to 325 days, and the average annual sunshine utilization time is 1600 hours. The barren hills and desertification areas are large; all the conditions for implementing PV poverty alleviation are very favorable. Against the trend in industry ‘winter’, performance exceeded expectations In 2018, the installed capacity of domestic PV projects provided by Antaisolar was more than expected; As a leader in focusing on aluminum profile for 13 years, it has built a complete aluminum profile industry chain from ingot melting, extrusion, anodizing, powder coating, fine finishing to packing. Antaisolar has supported dozens of over 10MW large-scale projects, and has rich experience in designing complex cases such as slopes and snow. In the past two years, in addition to continuously improve production capacity, we also focus on accelerating cooperation between enterprises and universities to implement the strategic deployment of production, study and research. Antaisolar will improve the customer service system to realize the standardization, specialization and refined management of services. In the upcoming years, Antaisolar will continue to meet the green development needs. Adhering to the philosophy of "creating a low carbon world ", Antaisolar looks forward to working with all the friends to achieve win-win cooperation!

Antaisolar provided roof mounting system for a gas station located in Antipolo, Philippines. This project was handled by SolarTech Renewable Solutions, who is the distributor of Antaisolar in Philippines. Besides, this project is the first one after both sides achieving friendly cooperation. The 50KW roof project adopted L bracket and corresponding accessories with estimated annual power generation of 57,000kWh. The installation of a distributed PV power generation system on the roof of the existing gas station can not only meet the electricity demand but also upload the surplus power generated by the PV power to the power grid, which is a new profit model for the existing gas station to help it create more benefits Successfully partnered with SolarTech Renewable Solutions Antaisolar has long been committed to the global layout. With the rapid growth of business volume, Antaisolar have been successfully provided solar rackings for utility projects such as hospitals, schools, seaports and so on. Since then, it seems that cooperating with local distributors or agents to provide products more conveniently and efficiently has naturally become a must. As the first solar racking enterprise of China to enter the Japanese market, Antaisolar will continue to focus on the countries and regions along the “Belt and Road” while keeping deepening its mature market so as to become the superb enterprise in high-quality development of new energy.